Dave Richards AA7EE

May 24, 2013

Taking Stock, New Desert Ratt 2 Recording, and A New Tut80 Run

When I started this blog almost 4 years ago, I was getting a (very small) handful of page views every day and had no idea that anyone would find it at all interesting or useful. In fact, I don’t think anyone did at first. Then I started building a few things and found that some people enjoyed looking at the pictures of my builds and in some cases, were encouraged to try building things themselves.

I used to think that in order to have a blog, website, or other kind of internet presence, you needed to be really, really good at something or it wasn’t worth putting your stuff out there, but I was missing the point. I think that the point is sharing. I don’t need to be one of the best at something, because everyone does things differently. If I do my best at something, and share the way that I did it, that information could well be useful to someone else who was trying to figure out how to do the same thing. Maybe my approach will present an interesting alternative to someone who was thinking of a different approach.

My last post on the NA5N Desert Ratt 2 Regen is quite a good example of this. I certainly didn’t design it so wasn’t offering anything radically new, but for anyone wanting to build one, there aren’t very many examples on the internet, with pictures, of DR2’s. Of the ones that exist, there aren’t a lot of detailed pictures, with discussion of construction details, all in one place. Perhaps someone was interested in building it, but was wanting to know the winding information for toroids (which doesn’t seem to be available online), or was wondering whether the tuning would be too fine, what kind of reduction drive to use etc. This is why I like to include this kind of information in my posts, in case it can help someone.

Since I sold my FT-817 2 years ago with a desire to rely more on homebrew gear, things have gone quite well. Admittedly the main rig at AA7EE has been a K2, which is not exactly home-brew, but it still felt good to prove to myself that I could assemble a kit of such complexity.

Apologies for the following 2 lackluster photos (it has to do with my inability in using flash to light indoor scenes, among other things) but here are the main bits of gear I have built in the last 2 or 3 years. These are the ones that worked; I left out the partially completed projects (which includes 2 DSB rigs that have working receivers but not fully working transmitters) .

On the top shelf, from left to right, is the 40M DC receiver using a Hi-Per-Mite filter, and an OHR WM-2 QRP Wattmer.

On the middle level is my K2, Fort Tuthill 80 (see news about a further release of Tut80 kits below), and the NA5N Desert Ratt 2 Regen.

On the bottom level you can see the Norcal 2N2/40, the first beta of the CC-20 and the first beta of the CC1 (it’s successor), both sitting on top of the G3WPO DSB80, and the N1BYT WBR Regen Receiver for 40M.

On the desk in front of that lot is a little 2 transistor TX on 7030 based on the Pixie 2 design. I have used it successfully with the WBR for a 100% home-brew on-air experience! –

The reason I arranged all these projects at my operating position and took their picture together is because I wanted to review my progress so far.  My interests are shifting, and it looks like ham radio will be taking a backseat to other pursuits for the next few months. This was a good way of putting a bookend on this period before I begin another one. This color shot shows why I usually drag my projects into outside light in order to photograph them.  I really need to work on my flash lighting skills (note the blown-out red channel on the freq displays – a bit of HDR work with Photoshop could have helped this, but sometimes I just want get on with things and post them!)

In other news, the videos I posted of the Desert Ratt 2 were intended to give a general sense of what this neat little regen is like to tune around the bands.  It doesn’t really give a good sense of what the audio from the receiver sounds like though, as I was using an MFJ-281 ClearTone speaker, which has a restricted audio response. On top of that, I was using the internal microphone of an old compact camera (Canon A80) to record it. To remedy this I made a recording the other night from the speaker jack of the DR2 directly into the line input of a little flash recorder (the Marantz PMD620, if you’re interested) and posted it to Soundcloud.  This will give you a much better idea of the quality of the audio from this receiver. Unfortunately, band conditions weren’t too good, so I wasn’t able to find any consistently strong signals with little in the way of QSB, but this recording of Radio Habana, Cuba isn’t too shabby.  It has been edited down, and the edit points are marked by cowbell sounds. When the signal gets strong, you can hear the wide frequency response and good fidelity of the Desert Ratt 2 –

And finally, I’ve had the pleasure of an e-mail chat with John K5JS, of the Arizona ScQRPions, and he informs me that they will be producing a final run of the Dan Tayloe designed Fort Tuthill 80 Direct Conversion CW QRP TX/RX. They already have the boards and many of the parts, so it sounds as if they just need to order some more parts and have a kitting party. This is no mean feat, as kitting is an awful lot of work. I don’t know when this will be happening, but it is definitely in the works. As you no doubt know, QRP Kits are selling versions of this rig for 15M and 160M, but I think it would be fun to buy another of the Tut80 kits when they come out and mod it for 40M. Has anyone done this? Could they post details of their mods to the Tut80 Yahoo Group if they have, perhaps?

In the meantime, the weather has been getting nicer and combined with the fact that the bands haven’t been in great shape, it’s as if mother nature is coaxing me to get out more. I plan to do just that. My bicycle has a new chain, and the weather is perfect for bike rides.  There’s also a new camera calling my name, which will require new photo software, and the inevitable upgrade of my operating system (I’m still on XP), as well as much time spent outside taking lots of pictures. I’ve been looking at my rather old photo portfolio and realizing that there is much work to be done, and much fun to be had.

Much work. Much fun,  I love it when the two go together 🙂

May 11, 2013

The NA5N Desert Ratt 2 Regen

EDIT – If you’re thinking of building the Desert Ratt 2, although the pictures in this post are numerous and quite large, I do recommend reading all the text too, as I have included what I thought were relevant details on the construction as part of my narrative. Also make sure to read the comments and replies.  Previous blog-posts have taught me that readers often ask pertinent questions, so you may be able to glean a little more information from them too.  In fact, just before I wrote this, Paul NA5N made a comment which includes a usefiul piece of information about the 2 x 1,000pF (0.001uF) capacitors in the regen stage.

EXTRA EDIT – Please read the update at the end of this post, after the videos.

I’ve been wanting to build NA5N’s Desert Ratt regen ever since I first found his very attractively drawn schematic for it online. I then found the updated version, called the Desert Ratt 2, and a very good description of how the circuit works – all of these documents available on Paul’s website. What more could an avid regen builder want? Not much, it turned out. Late last year, when N2CX and N2APB dedicated an episode of Chat With The Designers to the Desert Ratt (and to the subject of regens in general), I just had to listen and of course, it fueled my interest in building the DR2 even more. The whiteboard for this particular episode of CWTD is here, and the podcast audio is here.

The WBR was a successful regen for me and while it worked well on SSB/CW, it didn’t seem to quite have the gain with AM stations. This makes sense, as a regenerative detector has to be set below the point of oscillation for AM reception, at which point it has less gain than when it is oscillating (which is where you set it for SSB/CW reception.)  Even so, I had read that bipolar transistors tend to work better as regen stages for AM, as they have higher gain when not oscillating. The search was on for such a receiver, and this was one of the key deciding factors in building the DR2 for me. In fact, Paul has mentioned (I forget where I saw it, as I have done so much reading on this receiver) that the Desert Ratt doesn’t do so well with SSB/CW as it does with AM. My experience with it backs up this assertion, thought it’s a pretty neat receiver for AM.

In particular, I wanted a receiver for covering the 49M SW BC band as although my Elecraft K2 covers a few of the BC bands, 49M is not one of them. There were a few things I found interesting about the design. The use of a phase splitter transistor to convert the single-ended output of the detector to a balanced output in order to drive the LM386 in differential mode was novel. Paul talks about how much RF is flying around inside regen receivers, and how the common-mode rejection of the 386 when used in differential mode can be advantageous in such an environment. I was also intrigued by the detector consisting of 2 germanium diodes – I think I was just looking for an excuse to build something with Germanium diodes again to remind me of my crystal-set building days as a kid 🙂

If you look at the schematic of the DR2,  you’ll see that one of the changes in the design from the original DR is that instead of a variable capacitor, it uses 1N4004 diodes as varicaps. I have a bit of a “thing” for nice air-spaced variable capacitors, and I had in mind a nice Millen 50pF capacitor that I picked up on eBay for a very fair price last year. Combined with a 6:1 reduction drive, it made a good combination with a very useable tuning rate for tuning in AM stations.

Anyway, I’m getting ahead of myself here. I did make a few changes to the original schematic for my version, so allow me to introduce my rather wobbly circuit diagram –

The differences between my schematic and Paul’s are as follows –

– I added an RF attenuation pot at the antenna input. After building the DR2, I found that using a relatively short piece of wire indoors as an antenna was causing a lot of common-mode hum.  On top of that, I wanted to be able to increase the signal level into the receiver with the use of my regular outside antenna (A 40M dipole fed with 300 ohm balanced feeder.)  Using the attenuation pot allowed me to use the large outdoor antenna without overloading the receiver.  Use of my outdoor antenna created enough separation between the receiver and antenna that the hum problem almost entirely disappeared.

– Earlier versions of the Desert Ratt included instructions for winding the coil on a plastic 35mm film canister and on an IC shipping tube. The DR2 schematic doesn’t include such instructions, but I wanted to use a toroid, so I experimented a bit and came up with a scheme that seems to work OK.  I used a T68-6 former and the turns info is on my schematic above – a T50-7 would take up a little less space. More about this later.

– I had a few 2-position center-off switches that I wanted to use, so I used one of these for a bandswitch instead of the SPST switch in NA5N’s DR2 schematic. I had originally thought that using the 50pF tuning capacitor with no padding would make the upper limit of frequency coverage too high, resulting in too large a frequency swing in one band, but there must have been more stray circuit capacitance than I had anticipated, as the coverage with no extra padding was about 7.3 – 13MHz. This band became the center position.

– I was attempting to power the DR2 from my shack power supply, which is about 45AH of sealed lead acid batteries with a float charger constantly connected.  This also powers my K2, and the DR2 was picking up processor noise from the K2, as well as a low-frequency “burbly” kind of noise of undetermined origin. The problem went away when I powered the receiver from a separate SLA. but I decided to add extra filtering to the power line anyway.  I found that a 1mH choke as well as a 1,000uF electrolytic almost (but not quite) got rid of the unwanted interference on the power line.  For good measure, I added a 0.01uF RF decoupling capacitor across the power line at the input connection.

– I added an AF preamp stage directly after the diode detector to ensure enough power to easily drive a speaker – even with weak signals.

– The inputs to the LM386 are the opposite way around from the way indicated in NA5N’s DR2 schematic.  With the inputs connected as shown in Paul’s diagram, the LM386 emitted a loud screeching sound.  Swapping the inputs cured this. I was not the only person who had this problem, as I discovered from this post in the GQRP Yahoo Group (you need to be a member of the group to read the post).

–  I left pin 7 unconnected. I don’t understand the way that NA5N has it connected to the junction of the series resistor and capacitor connected between pin 5 and ground in his diagram.  Most circuits that use pin 7 call for a decoupling capacitor direct from pin 7 to ground (usually about 10uF).  This helps reduce large signal distortion, though Paul does say that in this application, it may not do a great deal to help and is therefore optional.  I elected to leave it unconnected.

Now for some pictures.  I didn’t want to spend a lot of time constructing an enclosure, so decided to make a simple PCB L-shaped chassis and build the circuit directly onto that.  With the variable capacitor mounting bracket, it still ended up taking quite a while to construct though. All my projects begin like this, with the main components and control being laid out on the front panel, while deciding on the basic layout –

I’ll spare you the words at this point and apologize for all the pictures that are about to come. If you’re living in a remote area and are still relying on dial-up, then I feel a bit sheepish about the sheer number of images to follow!  I’ve talked before about constructing enclosures from PCB material, so won’t repeat that information here. As well as constructing the chassis from PCB material, I also made a mounting bracket for the variable capacitor and a tuning pointer to attach to the reduction drive with 2 small screws – all from double-sided copper-clad laminate.

I applied several thin coats of lacquer from an aerosol spray.  It was sprayed from a distance, resulting in a light, and stippled coating, which you can see in these pictures. I’d rather apply too light a coat than risk overdoing it. The downside of this is that oxidation will being to affect the appearance of the copper fairly soon. Oh well. The capacitor mounting bracket received a thicker coat. You can see the smoother, shinier finish.

I got the 6:1 reduction drive from Midnight Science. A number of others sell them, and one place that springs to mind is Mainline Electronics in the UK. They are the suppliers for Jackson Bros components (I think they have the rights to manufacture and sell the parts).  They sell on eBay using the name anonalouise.

The enclosure looked a little bit different by the time the DR2 was finished, as the hole for the nylon toroid mounting hardware hadn’t been drilled in the base at this point.

Look at that gorgeous variable capacitor!

A close-up view of the Millen 21050 50pF air-spaced variable capacitor and mounting bracket. This component is silver-plated (the vanes are probably brass), and has double bearings and a ceramic base. It is a very nice variable capacitor, and had never been soldered to before being used in this project. It is at least 35 years old – most likely older!

Boy, was I glad to finish the chassis so that I could start work on wiring it all up.  I decided to build the AF amp first and work backwards, my thinking being that the AF amp would be relatively straightforward. The act of touching the input with a metal screwdriver and hearing a hearty buzz in the loudspeaker would give a welcome psychological boost! If I started by building from the antenna end, I’d have to wait until the entire receiver was built before getting any clue as to whether it was working.

Here’s the chassis with the LM386 amp, the 2N3904 phase splitter, and the 2N3904 preamp built. As has been the case with all my projects since I started using then, I used W1REX’s wonderful MePADs and MeSQUAREs to build the circuit –

Here’s a close-up. The 2N3904 preamp is just below the 6:1 reduction drive, and the 2N3904 phase splitter is to the left of the LM386.  The 100uF capacitor that decouples the supply line to the LM386 straddles it. I read that it is best to ground it to pin 4 instead of to some other point on the chassis to avoid instability, hence the reason for this placement. The other electrolytic that is straddling the chip is the 10uF capacitor between pins 1 and 8 that sets it to the maximum gain of 46dB. The black shielded cable connecting the AF gain pot to the circuit on the PCB is lavalier mic cable.  It has 2 conductors, each of them in it’s own shield, which is ideal for wiring up potentiometers. It is fairly thin and very flexible. I use it in all my home-brew projects. I bought it from a local pro-audio store which recently closed down, so will now need to find another supplier.

In this view, you can clearly see the extra DC supply line filtering that I added, consisting of a 1mH choke in series with, and a 1,000uF electrolytic across, the DC supply. After seeing these pictures, I noticed that there wasn’t very much solder on the joint connecting the choke to the power jack, so I re-flowed the joint and melted a bit more solder onto it.

The power indicator LED’s main function is as a voltage regulator. NA5N marked the various voltages on his schematic for the DR2, and I chose an LED with a forward voltage drop to match those voltages as close as I could.  A green LED in a variety pack I got from Radio Shack had a forward voltage drop of 2.1V, which seemed about right.  The 1N4148 had a forward drop of about 0.65V.

The next stages to be built were the detector and impedance converter/buffer stages.  The description of the DR2 on NA5N’s site gives more info on these stages (as it does for the whole receiver). I couldn’t be sure these stages were working, but bringing my finger close to the diodes resulted in a pleasing cacophony of stations in the headphones – and at a louder level than in doing the same to subsequent stages, so I figured there was some detection/amplification going on 🙂

I didn’t know how many turns I was going to use on the toroid, but using the calculator on W8DIZ’ site and an online resonant frequency calculator, I figured that 36 turns on a T68-6 should be a good starting point for the whole winding from pin 3 to pin 6. In Paul’s version, with the coils wound “traditional style”, the tickler winding was about 1/3 of the whole winding.  Coupling between windings is tighter with a toroid than a “regular” coil, so I reduced the number of turns on the tickler. I found that regeneration was occuring at only about 25% rotation of the regen pot, so further reduced the number of turns. Using the turns shown on my schematic at the beginning of this post,  the regen stage moved into oscillation at anywhere between 40 and 50% rotation on the pot, so I left it at that. For the same reason of tight coupling, I used fewer turns on the antenna winding too and because I am using an outdoor antenna, could probably have used even fewer turns.

The toroid was fixed to the PCB with nylon nuts, bolts and washers that I got from my local Ace hardware store.

Here are some pictures of my Desert Ratt 2 with the circuit finished –

The red wires running along the back of the front panel are the regulated 2.1V and 2.75V lines.  I would have run them on the main board but ran out of room due to lack of planning, so went vertical.  Incidentally, although I refer to the 2 regulated lines as 2.1V and 2.75V,  the exact voltages aren’t important.  That’s just what they turned out to be in my case.

The RF amp and regen stages can benefit from transistors with high hfe. I got a cheap Harbor Freight DMM that measures hfe from an eBay vendor for under $6 including shipping.  hfe varies depending on the collector current, but I was doing this mainly for comparative purposes rather than absolute values, so the fact that I didn’t know what value of collector current was used to measure hfe in this cheap meter didn’t matter. It just so happened that my 2N2222A’s tended to have higher hfe than my 2N3904’s, so I ended up using a 2N2222A that measured in at hfe = 203 for the RF amp, and a 2N2222A with hfe = 223 for the regen stage.  The other stages don’t require high-gain transistors. NA5N talks about it in this post on QRP-L from 1999. Bear in mind that he was talking about the original version of the Desert Ratt in this post (just so you don’t get confused when he identifies the various transistors).

I did promise that I’d give a bit more detail on the toroid. Mine was wound on a T68-6 former. The main winding was 30 turns tapped at 27 turns from the top (3 turns from the bottom). The antenna coupling winding was 5 turns.  All turns are wound in the same direction. I used 26 gauge wire, but the precise gauge isn’t important. 26 gauge was narrow enough to easily fit all the turns on the former, yet stout enough to lend some stability to the oscillator, as the toroid isn’t sitting close to the board, and the leads are relatively long. When putting taps on coils, I used to not cut the wire i.e. I would simply make a loop in the wire, twist it, tin the twisted part and keep on winding.  Now I find it is easier to treat them as 2 separate windings connected together. If you can get heat-strippable wire, please do – it makes winding toroids so much easier and more pleasurable.  I wound the first winding of 27 turns, stripped and tinned the end, then stripped and tinned the end of another piece of wire, twisted and soldered them together, and carried on winding the last 3 turns in the same direction (this is important).  The separate antenna winding of 5 turns is also wound in the same direction.  I’m afraid I didn’t write down (or if I did, I have since lost it) the lengths of wire used. I did notice that the turns calculator on W8DIZ’ site (linked earlier in this post) was quoting lengths that are too short for the T68-6 former.  All you have to do is wind one turn around your former, measure that length, multiply it by the number of turns you’re going to wind, add an extra inch or two for the leads and, as we say in England, Bob’s yer Uncle and Fanny’s yer Aunt (meaning – you’re home free!)  When winding toroids, I often find that the first 1 or 2 turns aren’t quite as tight as the rest so when I’ve finished winding, I will unwind one turn from the beginning of the coil, then wind an extra one at the end, to keep the total number of turns the same.  Sometimes I will repeat that exercise a few more times until all the turns are nice and tight.  For this reason, I use enough wire to leave several extra inches at each end.

The next picture shows an anti-hiss filter that wasn’t in the earlier pictures, which I tried and ended up removing due to a low-frequency oscillation it was causing at the higher volume settings.   It was a series 0.01uF capacitor and 4.7K resistor connected from pin 1 of the LM386 to pin 5.   From what I have read, too low a value of resistor or too high a value of capacitor can cause the oscillation. I have seen other anti-hiss filters that used a 0.01uF cap and a 10K resistor, so it is very possible those values would have cured my problem. However, I was near the end of the project and itching to move on, so I just removed it. You can also see the 0.1uF capacitors on the inputs of the IC that have been swapped over to stop the uncontrolled oscillation, and are now crossing each other.  You may not have to cross these caps if you plan your layout accordingly –

Other than the problem with the loud screeching that was solved by swapping over the inputs to the LM386 (my schematic reflects the way the inputs were finally connected), the only other problem I had was with what appeared to be a defect in the 0.001uF (1,000pF) capacitor that leads from the tap on the coil to the emitter of the regen transistor.  I wasn’t getting any regeneration at all but on replacing this capacitor, the circuit broke into a nice loud hiss when advancing the regen pot.

I do have one ongoing issue that I hope someone can shine a light on for me, and that is a loud crackling sound when adjusting the tuning capacitor. At first, I thought a dirty rotor connection was the problem, but it only happens when extra padding capacitance is switched in by the band-switch   With no extra capacitance switched in, the tuning is smooth, but on the lower frequency bands, the receiver crackles when being tuned.  I need to try bypassing the band-switch and soldering the padding capacitors into circuit in case the switch is the problem. I’ll report back when I’ve done further work on this.

Incidentally, the main tuning range on mine covers approximately 7250 – 13000KHz.  Switching in a 47pF capacitor changes the range to 5825 – 8050KHz. I’m a bit limited with my receiver and test equipment here, so haven’t yet been able to determine the coverage of the lowest frequency band.

When first listening to the DR2, I had no idea what frequency I was listening to – only that I was probably somewhere between 5 and 12 MHz. I had no antenna connected (and at this point, hadn’t even built the RF amp stage) but started hearing CW. Lo and behold, it was Hank W6SX 180 miles away from me in Mammoth Lakes, CA. His CW signal was coming through well and in fact, this was the only time I have received CW in a satisfactory fashion on the Desert Ratt. There was no antenna – he was being picked up directly by the toroid.  Any concerns I might have had about the sensitivity of this receiver would have been immediately allayed.

I know the main question that is probably on your mind is – how does it sound, and what is it like to use? How does it “handle”? There are some videos of my Desert Ratt 2 in action at the end of this post. Apologies for the poor video quality, but my only video camera is 10 years old (and has a faulty CCD sensor). You’ve probably read articles about regens that describe the many and subtle adjustments that need to be made when tuning a regen in order to coax maximum performance from it. If you haven’t operated a regen before or if it’s been a while, it does take some time to get the hang of getting the best out of it. As you get further away from the setting of the regen pot where it breaks out into oscillation you lose selectivity and gain, so you need to try and keep the control set just under the point of oscillation. Loud stations can overload the detector, resulting in audio distortion, so it’s worth keeping an eye on the RF attenuation pot too. Also, if the attenuation pot is set too high (too little attenuation), you may get breakthrough from stations on other frequencies. There’s quite a bit going on to keep under control, but if you manage to keep all controls adjusted well, you can coax some pretty decent performance out of the set. I think this is why regens appeal to some people – we are incurable knob-twiddlers!

Stability is easily good enough for AM reception and with a logging scale fitted to the front panel, I don’t think it would be hard to find specific frequencies, as the majority of SW BC stations stick to 5KHz channels. In my casual listening so far, I have heard The Voice Of (North) Korea on 9435 and 11710KHz, Radio Habana, Cuba on the 49M band, Radio Australia on the 31M band, coastal station KLB (South Korea) on 8636KHz, the BBC World Service (forget which band or frequency), China Radio International on 9790KHz, WTWW on 5830KHz, and a number of other evangelical Christian stations (sorry, I tune them out and don’t pay them much attention.)

To sum up, you can definitely have a lot of fun and engagement with the bands on this set.  Being a regen, it is not the easiest receiver to operate, but you shouldn’t let that put you off. The best analogy I can think of is to reference the way that although an older British sports car may not have the finesse and performance of a newer sports model, it’s a lot of fun, and it’s lack of suspension gives you an exhilarating feel for the road that the more expensive cars cannot.

The Desert Ratt 2. A logging scale fixed to the front panel would make frequencies in the SWBC bands easy to find. I must do this sometime 🙂

Please note that in the following videos, an MFJ-281 ClearTone speaker was used. My understanding is that this speaker has a slight resonant peak at around 700Hz (helpful for CW) and a relatively restricted overall bandwidth that is good for communications applications. This probably means that it’s not optimum for getting the maximum fidelity from an AM SW broadcaster (not that those stations have a lot of fidelity, but they tend to have a bit more than your average SSB transmission). On top of that, the audio was captured with the built-in mic in my old Canon A80 compact. Please don’t judge the quality of the Desert Ratt 2 audio from these clips. It’s better than this! I’m working on a few audio only recordings that will better demonstrate what the DR2 sounds like, and will put them up in the next blog-post (hopefully within a week or so).

Update – It has been about a year since I built my version of the Desert Ratt 2 and I feel compelled to provide an update. Whenever I first build a project I am often so thrilled that it works at all, that I tend to gloss over any shortcomings, particularly in my blog write-ups. Some of this is due to the possibility that any deficiencies are due to my layout and construction, as opposed to a problem with the circuit design. In the case of my DR2, I am still not sure whether the issues arise from the circuit itself or from my construction, as I have only built one of these. I did, however, want to document what I have observed, as my DR2 has laid on my shelf for the past year, largely unused, while I drag my WBR out and take it for a spin on a regular basis. Here are the issues I have observed –

* There is a lot of scratchiness in the speaker when tuning the DR2. This happens on some frequency ranges more than others, but it happens a lot.  At first, I wondered if it was due to inadequate grounding of the rotor plates but I don’t think this is the case. There is a solder tab for both the rotor and the stator, and the rotor is grounded to the chassis by a direct wire. Also, it is a quality Millen variable capacitor, and it is clean (the oxidation has been cleaned off).  I’m still considering the possibility that it as something to do with my variable capacitor, or the way that I have connected it.

* The set does seem to overload very easily on my outside antenna. Breakthrough from other frequencies is a common occurrence. This got me to thinking about the RF amp stage. The instructions call for picking a high hfe transistor to use in this position but thinking about this, I’m not sure why. Surely the purpose of an RF stage in a regenerative set is to provide isolation between the detector and the antenna, with gain actually being undesirable, due to the tendency of the detector to overload? The more I think about it, the more I think that different configuration for this RF stage would be more appropriate.

* Hum, though not always apparent, does still occur from time to time.

A commenter who goes by the name of Mast does mention that the tank circuit is very tightly coupled to the collector of the regen transistor. I’ll cut and paste his comments here, as I now wonder why I didn’t pay more attention to his input at the time,

“A nice schematic for general use. But the tank circuit is tightly coupled to the collector of the regenerative stage. You will suffer a lot from changing internal stray capacitances of the transistor when setting the regen level. And strong SSB signals will change these capacitances too, causing an unintelligible reproduction of SSB signals.”

At this point, the DR2 has gone back on the shelf while I move on to planning other projects, but I’d be very interested to hear what the experiences of others have been with this circuit.  I know there are folk who found N1TEV’s beginner’s regen to be a little hard to tame – and the DR is based in part on that circuit.  In contrast, both my WBR’s are well-behaved, and have been used regularly since I built them.

Blog at WordPress.com.